What is Reaction to fire testing?Reaction to fire testing looks at the combustibility and ignitability of a material i.e. its contribution to fire development and spread, rather than its ability to resist the passage of fire (which is proven by fire resistance testing).

What is the LPCB standard for flame cable standard?The Loss Prevention Certification Board (LPCB) was established in 1880 and has been dedicated to fire safety and setting relevant standards. Its certifications are widely recognized and applied globally in the fire and security industries.

Fire Resistance Tester for Wire and Cable is ready for shipment. This equipment can meet BS 6387, IEC 60331, BS 8491, EN 50200 and so on test standards' requirement. It is suitable for mineral insulated cables with a rated voltage not exceeding 0.6 to 1KV, and can keep the circuit intact for a long time under flame conditions.

NFPA 130-2023 Main Test Standards (ASTM E162, E662)The main test standards of the American standard NFPA130-2023 are ASTM E162 surface flame propagation performance test, ASTM E662 smoke density test, and BSS7239 post-combustion toxicity test.NFPA 130 American Standard Fire Test NFPA 130 standa

Difference between EN45545-3 and EN45545-2EN45545-3 standard is the fire resistance performance requirements and fire resistance test standards for vehicle materials. EN45545-2 standard is the fire performance requirements for vehicle materials. For vehicle shielding and flooring overall materials,

ISO 9705 Large Size Fire Heat Release Rate Measurement1. Experimental purposes 1) Test materials’ heat release rate, smoke generation amount, smoke generation rate and other indicators; 2) Evaluate the combustion characteristics of materials under actual large-scale fires; 3) Evaluate Australia’s AS

IEC 60754 Cable Corrosion Tester Ready for Shipment

Flame Retardant Test Flame retardant test is to detect the burning characteristics of products and materials. There are many products that require flame retardant testing, such as fireproof material products, building material products, electronic and electrical products, textiles, household items, p

IEC 60332 Single wire and cable vertical combustion tester is ready for ship to our Malaysia.Single cable vertical combustion tester used to test wire and cable in overheating, overcurrent and other abnormal state, its insulation layer flame retardantperformance. It is applied to the vertical flame

What is the Cone Calorimeter Test?The Invention of Cone CalorimeterThere are many test methods to evaluate the reaction to fire performance of materials, such as the Small Flame Source Test (ISO 11925-2), Oxygen Index (LOI) Test (ISO 4589-2, ASTM D2863), Horizontal and Vertical Flammability Test (UL