UL1581 Cable Horizontal & Vertical Specimen Flame Tester

UL1581 Cable Horizontal & Vertical Specimen Flame Tester

This large combustion cabinet is strictly produced in accordance with UL1581 section 1080.1~1080.14 standards and meets the VW-1 (Vertical specifications) Flame Test combustion test standard for wires and cables. Used for conducting 1060 vertical combustion and FT1 test, 1061 cable combustion test, 1080VW-1 (vertical specimen) combustion test, 1090 electrical wire horizontal specimen combustion test, and 1100 horizontal specimen/FT2 combustion test on finished wires, cables, or flexible cords to evaluate the ability of wires, cables, or flexible cords to spread flames to nearby flammable substances when ignited. Economically applicable and widely used in the wire and cable industry. Used to test the flame retardant performance of the insulation layer of wires and cables under abnormal conditions such as overheating and overcurrent. The entire experiment was conducted in a sealed laboratory with a volume of 4.54 cubic meters.

Test method: adjust the flame height to placed the specimen at the top of the flame, burning for 15 seconds, extinguished 15 seconds, repeat 5 times,then inspecting the burned situation of the specimen, it can be set the combustion, extinguish and repetition automaticlly.

Standars：
• UL1581 sect 1060~1100
• GB/T 12666.2-2008
• ASTM D 5025
• ASTM D 5207

Applicable standards for UL1581 combustion testing machine: This testing device meets the requirements of UL1581-2001 sections 1060 \1061 (vertical combustion and FT1 test), 1080 (VW-1 combustion test), and 1090 \ 1100 (horizontal specimen/FT2 combustion test).