IEC 60332-1 Flame Propagation Test for Single Cable
Product Description
IEC 60332-1 Flame Propagation Test for Single Cable
Introduction:
Wire and Cable is second-largest industry. Single wire and cable vertical burning tester is the most widely used and low cost of cable fire performance test equipment. Single wire or cable burning tester meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current and other non-normal state. It can be used for vertical or fiber optic wire and cable flame spread test,and test combustion conditions of Dettol matter under fire conditions.
Standard:
IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008
Main features:
1. Touch screen intelligent control system; English user interface.
2. Automatic ignition system, automatic timing, automatic data storage.
3. The test section and the control section is combined design in one box for operation.
4. Stainless steel test box, the internal cavity size: height 1200mm,width 300mm, depth of 450mm.
5. A pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, length is 100mm. 1KW hybrid standard burner,which provides accurate test fire source.
6. The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.
7. Needle valve precisely adjust the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm.
8. The gas flow rate is controlled by needle valve.
9. Equipped with a flame height caliper.
10. Equipped with a gas flow meter and pressure regulator; automatic ignition.
11. The torch angle is 45 °, 0 ° adjustable.
12. The flame calibration device is optional.
GD-IEC60332-1 Single Cable Flame Propagation Tester
GD-IEC60332-1 Single Cable Flame Propagation Tester
GD-IEC60332-1 Single Cable Flame Propagation Tester
Specifications:
Operating voltage | AC220 V ± 10V 50HZ |
Ambient temperature | room temperature ~ 40 ℃ |
Gas Pressure | 0.1MPa |
Gas purity | Propane> 95%; compressed air |
Timing Accuracy | 0.1s |
Model | GD-IEC60332 |
Size | 600(W)×450(D)×1250(H)mm |
Power | AC 220V, 50/60Hz, 3A |
Weight | 60kg |
Manual | Provide |
Welcome to contact us:
Contact Person: Kiana Feng
Whatsapp/Wechat: +86 15922982738
Mobile: +86 15922982738
Fax: +86-23-62940030
Email: gold20@hy-industry.com