Article List
- UL 10C Standard for Safety Positive Pressure Fire Tests of Door AssembliesIntroduction to UL 10C StandardFire doors play an important role in ensuring life safety and property protection. Fire doors are usually located at emergency exits, which can separate fires for a certain period of time, prevent the spread of fire, and ensure the evacuation of people and crowds.THREE November 29, 2024
- Wire and cable BS 6387 IEC 60754 IEC 61034 fire test equipment shipped to ThailandThe wire and cable fire resistance impact tester is developed and produced according to IEC 60331 BS6387 standards. It is used to test the integrity of the line when the flame temperature is not less than 830℃ and a certain impact vibration is applied. It can test the A, B, C, and D flame retardantNews November 13, 2024
- UL1581 Cable Horizontal & Vertical Specimen Flame TesterUL1581 Cable Horizontal & Vertical Specimen Flame TesterThis large combustion cabinet is strictly produced in accordance with UL1581 section 1080.1~1080.14 standards and meets the VW-1 (Vertical specifications) Flame Test combustion test standard for wires and cables. Used for conducting 1060 verticNews November 04, 2024
- WNK-200G Intelligent high temperature double plate thermal conductivity test deviceWNK-200G Double Plate High temperature Thermal Conductivity Tester
- What does it really mean fire resistance? What are the challenges and threats to fire safety that come with it?What does it really mean fire resistance? What are the challenges and threats to fire safety that come with it?Companies often use the term “fire-resistant product”.Well, it seems that’s only a part of the information. Fire resistance, in general, is the ability of a product/system to withstand a fiNews September 06, 2024
- What is Reaction to fire testing?Why reaction to fire testing?What is Reaction to fire testing?Reaction to fire testing looks at the combustibility and ignitability of a material i.e. its contribution to fire development and spread, rather than its ability to resist the passage of fire (which is proven by fire resistance testing).
- Ensuring Safety and Compliance with Precision - Explore Our Range of Fire Test Instruments for Electronic ComponentsAre you in search of reliable and accurate fire testing instruments to ensure the safety and compliance of your electronic components? Look no further! We offer a comprehensive range of state-of-the-art testing equipment, including the UL94 Horizontal/Vertical Flame Tester, Needle Flame Tester, Glow
- UL94 flame retardant testA set of moving pictures to understand the UL94 flame retardant test UL 94 is the most widely used standard for the plastic materials to evaluate their flame retardant performance. There are 12 grades: HB, V-0, V-1, V-2, 5VA, 5VB, VTM-0, VTM-1, VTM-2, HBF, HF-1, HF-2.UL 94 is used to evaluate the ab
- What Is The LPCB Standard for Flame Cable Standard?What is the LPCB standard for flame cable standard?The Loss Prevention Certification Board (LPCB) was established in 1880 and has been dedicated to fire safety and setting relevant standards. Its certifications are widely recognized and applied globally in the fire and security industries.
- Fire Resistance Tester for Wire and Cable is ready for shipmentFire Resistance Tester for Wire and Cable is ready for shipment. This equipment can meet BS 6387, IEC 60331, BS 8491, EN 50200 and so on test standards' requirement. It is suitable for mineral insulated cables with a rated voltage not exceeding 0.6 to 1KV, and can keep the circuit intact for a long time under flame conditions.News June 19, 2024