Customized Horizontal And Vertical Flame Tester UL 94 with Foam Vertical Combustion Performance Test

Customized Horizontal And Vertical Flame Tester UL 94 with Foam Vertical Combustion Performance Test

Test Standard:

• Horizontal and vertical combustion test: UL94 IEC 60695-11-10, IEC 60707, ISO 1210, GB/T 2408; GB 9493-2001

• 50W vertical combustion test: UL94 V-0, V-1, V-2, IEC 60695-11-10, ISO 1210, GB/T 2408, GB/T 5169.16/22;

• 500W vertical combustion test: UL94 5VA, 5VB, IEC 60695-11-20, GB/T 5169.15/17;

• Vertical combustion test of thin film materials: VTM-0, VTM-1 or VTM-2, ISO 9773;

• Test method for combustion performance of foam plastics - Horizontal combustion method :GB/T 8332, ISO 9772: HBF, HF-1, or HF-2

• Equipped with: 500W flame flow control system

• Optional: GB/T 8332-2008, foam vertical combustion performance test

Product introduction:

Horizontal and vertical flame tester is applicable to the components, parts and elements of electrical and electronic products and household appliances, such as the insulating shells of household appliances, switch panels, printed circuit boards and insulating materials.

GD-UL94-T2 Horizontal and vertical flame tester is in accordance with the actual needs of users, on the basis of UL94 horizontal - vertical flame tester (50W+500W) integration of "GB/T8332-2008 rigid foam combustion performance test method horizontal combustion method" test equipment and test procedures, designed as an integrated machine, so as to maximize the cost and space for users.

Main Feature:

Cabinet and fixture features

• Box size: length 1400mm X width 700 mm X height 1300mm;

• Large test box 0.75m3, to ensure that the test has sufficient air supply;

• Box baking paint treatment, internal baking black paint (standard requirements), corrosion resistance.

• Large glass observation window, beautiful and easy to observe the burning state of the sample.

• Advanced industrial appearance design, test operation, consider ergonomic design, easy to reach the sample, burner tie rod design, easy to operate.

• All fixtures are made of 304 stainless steel, beautiful and corrosion-resistant. Fixture for horizontal and vertical combustion integrated design, easy to operate, saves space.

• The standard provides that the wedge-shaped bracket can be freely retractable, and it meets the test requirements of special materials; Length 120mm±2mm, width 20mm±1mm; Material: 304 stainless steel, corrosion resistant.

• 304 stainless steel flame height scale, accuracy 0.5mm;

• The tester consists of a test part and a control part and adopts an integrated design to facilitate on-site installation and debugging.

HBF, HF-1, or HF-2 test part:

• Double burner station setting: the Bunsen burner imported from the United States complies with ISO10093:1998. Barrel length 100±10mm, inner diameter 9.5±0.3mm. Precise control of blue flame height 25~35mm; Horizontal combustion with wing top nozzle, 400mm high;

• Programmable controller PLC+ touch screen to achieve control/detection/calculation/data display.

  (1) Pulse high voltage electronic automatic ignition.

  (2) Timing time reminder, time timing automatically stored, and reflected in the test report.

  (3) Test time and heating time can be set on the touch screen.

  (4) Temperature LCD intelligent display

• Imported pressure gauge and pressure regulator.

• The inlet needle valve and the gas mass flowmeter accurately control the gas flow.

• The automatic recording timer device can record the test time;

• Flame height: horizontal combustion: blue flame 38mm, measured temperature 1000℃ from the wing top;

• Sample bracket: horizontal combustion: Φ0.8mm wire mesh, mesh each side length 6.4mm, mesh length 215mm, width 75mm, height 13mm.

Specification: